Quick Start Guide - Toshiba BMS-CT1280UL Manual

Touch Screen Controller
1

Quick Start Guide

To start/stop the air conditioner(s)
To change the set temperature
To change the Mode (Cool/Heat/Auto/Dry/Fan)
To check whether you have forgotten to
turn off the air conditioner(s)
To check for current alarms
To set start/stop timer
To configure and confirm the energy
saving settings
To operate the Total Heat Exchange Unit
To cancel the FILTER Sign after filter cleaning
To connect with a PC that has the PC
software Data Analyzer installed and
display the usage of energy
To connect with a PC that has Report
Creation Software installed and
display the power usage report
To output the daily and monthly report files, the alarm files, and the setup files
by USB
-EN
6
Batch ON/OFF screen
Alarm history screen
Advanced Usage
Return Back
Eco Temperature Shift
Change Temperature Range
Save Mode
Schedule settings
Power peak cut schedule
Connect with the PC that has the PC
software Data Analyzer installed and
display the energy usage
IP Address Setting
Output to USB memory
Connect with a PC that has Report
Creation Software installed and
display the power usage report
Automatic Meter-Reading
Manual Meter-Reading
IP Address Setting
Basic Usage
Please use the following functions as necessary.
Owner's Manual
 "Start/Stop Operation" (P.25)
 "Change the Air Conditioning
Settings (ON/OFF/Mode/Wind
direction/Fan Speed/Set temp.)"
(P.28)
 "Change the Air Conditioning
Settings (ON/OFF/Mode/Wind
direction/Fan Speed/Set temp.)"
(P.28)
 "Monitor the Overall Air
Conditioning System" (P.39)
 "Monitor the Overall Air
Conditioning System" (P.39)
 "Set the Operation Schedule" (P.33)
 "Configure and confirm the Return
Back settings (Return Back)" (P.46)
 "Change to energy saving temperature
(Eco Temperature Shift)" (P.47)
 "Set the temperature change range
(Set temp. range limit)" (P.47)
 "Control air conditioner power (Energy
saving ratio [%])" (P.46)
 "Set the Operation Schedule" (P.33)
 "Set demand control schedule of
outdoor unit (Power peak cut
schedule)" (P.60)
 "Turn ON/OFF the ventilation function
(Ventilation → ON/OFF)" (P.44)
 "Erase FILTER Sign (Filter sign reset)"
(P.45)
 "Settings when Using the PC Software
Data Analyzer" (P.24)
 "Set the IP address of the Touch
Screen Controller (IP Address)" (P.69)
 "Output data to a USB memory stick
(Output to USB memory)" (P.63)
 "Electric Power Allocation System that
can be Used with this Unit" (P.76)
 "Set the summation date of the power
allocation data (Automatic Meter-
Reading)" (P.77)
 "Sum data for power allocation as
necessary (Manual Meter-Reading)"
(P.78)
 "Set the IP address of the Touch
Screen Controller (IP Address)" (P.69)
 "Output data to a USB memory stick
(Output to USB memory)" (P.63)