Settings When Using Report Creation Software; Unit Settings; Pc Settings; Settings When Using The Pc Software Data Analyzer - Toshiba BMS-CT1280UL Manual

Touch Screen Controller

Settings when Using Report Creation Software

By using the Report Creation Software, you can easily check/output reports (monthly report/daily report) for electric power
allocation summed by the Unit with a PC. When using the Report Creation Software, apply the following settings.
● NOTE
For details on how to use the Report Creation Software, refer to the operation manual of the Report Creation Software.

Unit settings

1
Set the IP address of the Unit (P.69)
2
Set the summation date for the power allocation data using the Unit (P.77)

PC settings

1
Install the Report Creation Software on the PC
For details, refer to the "Installation Instructions" included in the attached DVD.
2
Register the target system (this Unit) in the Report Creation Software
For details, refer to the operation manual of the Report Creation Software.

Settings when Using the PC Software Data Analyzer

When using the PC software Data Analyzer, you can display the operation status and operation history of the air conditioners
aggregated by this Unit on a PC screen.
● NOTE
For details on how to use the PC software Data Analyzer, refer to its operation manual.
Unit settings
1
Set the IP address of the Unit (P.69)
PC settings
1
Install the PC software Data Analyzer on the PC
For details, refer to the "Installation Instructions" included in the attached DVD.
2
Register the target system (this Unit) in the PC software Data Analyzer
For details, refer to the operation manual of the PC software Data Analyzer.
24 -EN
Owner's Manual