Analog Expansion Boards [M8260 To M8279 And D8260 To D8279] - Mitsubishi Electric MELSEC-Q Structured Programming Manual

FXCPU Structured Programming Manual
[Device & Common]

4.2.18 Analog expansion boards [M8260 to M8279 and D8260 to D8279]

When the analog expansion board is connected, operations and functions are assigned to devices shown in
the table below in accordance with the connection position.
Operations and functions in the table below are shaded for write-prohibited devices.
1. Special auxiliary relay (M8260 to M8279)
• FX /FX PLC
3S 3G
Number
1st analog expansion board
M 8260 Input mode switching Ch1
M 8261 Input mode switching Ch2
M 8262 Not used
M 8263 Not used
M 8264 Not used
M 8265 Not used
M 8266 Not used
M 8267 Not used
M 8268 Not used
M 8269 Not used
2nd analog expansion board
M 8270 Input mode switching Ch1
M 8271 Input mode switching Ch2
M 8272 Not used
M 8273 Not used
M 8274 Not used
M 8275 Not used
M 8276 Not used
M 8277 Not used
M 8278 Not used
M 8279 Not used
*1. In the case of FX
*2. Only a 40-point or 60-point type FX
234
Operation and function
*1
FX -2AD-BD FX
3G
Output mode switching
Not used
Not used
Not used
Output hold mode cancel
Not used
Not used
Not used
Not used
Not used
*2
Output mode switching
Not used
Not used
Not used
Output hold mode cancel
Not used
Not used
Not used
Not used
Not used
PLC, versions 1.10 or later are applicable.
3G
4 Operations of Special Devices (M8000 and later, D8000 and later)
4.2 Supplement of Special Devices (M8000 and later and D8000 and later)
→ For details, refer to the Analog Control Edition.
*1
-1DA-BD
3G
PLC can be connected.
3G