Transferring Files; Using Windows Explorer - Creative Nomad Muvo2 User Manual

Using Your Player
Transferring
Files
You can use your
player as a portable
storage device to store
any data type, from
documents to
presentations and
photos.
Using Windows
Explorer
For more information
about using Windows
Explorer, refer to its
online Help.
You can use either Windows Explorer or Creative MediaSource Organizer to
transfer files from your computer to your player. Only MP3 and WMA files, however,
can be viewed and played back on your player. For more information about music
files, see "About Music Files" on page B-1.
Note: If you are using Windows 98 SE, you will need to install the Windows 98 SE drivers
from the Installation CD before you can transfer files. For instructions on installing these
drivers, see "Step 2: Install Software" on page 3-2.
1. Connect your player to your computer's USB port using the supplied USB
cable.
2. Launch Windows Explorer on your computer. Your player is recognized as a
Removable Disk in Windows Explorer.
3. Transfer files to your player using a drag-and-drop operation.
4. After the transfer is complete, make sure you stop your player before
disconnecting it from your computer. See "Usage" on page C-2 for instructions
on stopping your player.
Using Your Player 4-1