Table of Contents
Advertisement
3. Press 1 to confirm the deletion.
CALLBACK
When reviewing received calls, there are two ways to dial the tele-
phone numbers shown on the display by pressing DIAL.
1. If you have reviewed the calls with the telephone handset on
hook, press DIAL. The HANDSET symbol in the display will come
on, and the number you have selected will be dialed automatically
via the speakerphone.
2. If you have already picked up the handset or activated the speak-
erphone, you may select the number to be dialed by reviewing the
stored calls. After locating the desired number, press DIAL. The
displayed number will be dialed automatically.
7-10-11 BUTTON
7-10-11 allows you to change the format of the displayed number.
These are the available formats:
7-digit
7-digit telephone number.
10-digit
3-digit area code + 7-digit telephone number.
11-digit
long distance code 1 + 3-digit area code + 7digit
telephone number.
If a local call, and its 7-digit number is displayed:
•
Pressing 7-10-11 once will change it to a 10-digit format (your
area code + 7-digit number).
•
Pressing 7-10-11 twice will change it to an 11-digit number (1 +
your area code + 7-digit telephone number).
•
Pressing 7-10-11 three times will go back to the original 7-digit
telephone number.
If a long distance call, and its 10-digit number is displayed,
•
Pressing 7-10-11 once will remove the 3-digit area code and
change it to a digit number.
•
Pressing 7-10-11 twice will go back to the original 10-digit
number.
•
Pressing 7-10-11 three times will add the LDS code to the num-
ber. (1+ 3-digit area code + 7-digit telephone number).
When the desired format of the telephone number is reached, press
DIAL to dial the displayed number.
MESSAGE ERROR
The display shows [-MESSAGE ERROR-]" if your unit receives a call
that has an error in the transmission or reception.
17
Hide quick links:
Advertisement
Table of Contents
