Master MB Bucker 500 Instructions For Use And Maintenance Manual page 23

Operating the machine
IN: pull branches in
OUT: expel branches out
We recommend:
Raw material conditions
and the conditions of the raw material.
the same characteristics must not be processed.
Preparation of the raw material
interfere with the debudding process.
We recommend making a
easily draw them in.
Checks
Connect the
1
machine to a
source of
power.
Quality control
head for one more suitable for processing the branch or regulate the speed.
Tilting
It may be helpful to tilt the upper part to ensure the comfort of each operator so that the operator can better
adapt to the working conditions. The MB Bucker 500 can be tilted as shown below. Only a No. 6 Allen key (F) is
23
2
Press ON.
at the ends of thicker branches so that the rollers can
3
Set the indicator
to IN.
so as not to
4
We recommend
starting with a
lower speed.