Transport; Electrical Connection; Start-Up; Assembling The Machine - Master MB Bucker 500 Instructions For Use And Maintenance Manual

Transport

Electrical connection

The MB Bucker 500 machine should be connected to a single-phase 230 V/50-60 Hz electrical power supply.
Placement
suitable for indoor use and under no circumstances should the electrical part be exposed to water.

Start-Up

Assembling the machine

Checks to be carried out before connecting

Hibernation mode

the rollers are separated to maintain their correct shape and so that they are not deformed due to contact between them.
times.

Initial setting of rollers

ADJUSTMENT" section below and perform steps No. 1 throu-
gh 6. This initial setting takes the machine out of the hiberna-
Pallet 75 x 80x 140 cm = 130 kg // Net weight MB Bucker 500 = 70 kg
20