Separating The Rollers - Master MB Bucker 500 Instructions For Use And Maintenance Manual

3
top nut back on as shown in the following
images to lock it. Repeat the same process
on the other side.

Separating the rollers

1
as shown in the following image to unlock it.
Repeat the process on the other side.
3
nut as shown in the following image to lock it. Repeat
the process on the other sidel.
Position and tighten the four bolts of the front fairing
5
and the four bolts of the rear protection using the No.
4 Allen key (E).
Screw the upper nut shown in the following image
2
rollers separate. Repeat the process on the other
side.
4
front fairing on the Master Bucker 500.
Connect the machine to a power source to work with
6
it again.
22