Virtual Server - D-Link DWR-921 User Manual

Section 4 - Configuration
The device can be configured as a virtual server so that users can access services such as Web or FTP via the public (WAN) IP address of the router.
You can also allow the settings to run on a specified schedule.
This contains a list of pre-defined services. You can select a service,
Well-known
select a rule ID, then click the Copy to button to copy the default
Services:
settings for that service to the specified rule ID.
Specifies which rule to copy the selected Well known service
ID:
settings to when you click the Copy to button.
Select a schedule to use and copy to the specified rule ID when
Use schedule
you click the Copy to button. You may select Always On or use
rule:
a specific schedule that you have defined. To create and edit
schedules, please refer to Schedules on page 57.
VIRTUAL SERVERS LIST
This identifies the rule.
ID:
Enter the public port(s) you want to open.
Service Ports
Enter the IP address and port of the computer on your local
Server IP: Port:
network that you want to forward the Service Ports to.
Check the box to enable the specified rule.
Enable:
Specify the schedule rule number. To create schedules, click on
Schedule Rule #:
the Add New Rule button. For further information on schedules,
please refer to Schedules on page 57.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-921 User Manual

Virtual Server

39