Wi-Fi Advanced - D-Link DWR-921 User Manual

Section 4 - Configuration
This page contains settings which can negatively affect the performance of your router if configured improperly. Do not change these settings
unless you are already familiar with them or have been instructed to make the change by one of our support personnel.
Specify a value for the beacon interval. Beacons are packets sent
Beacon Interval:
by an access point to synchronize a wireless network. 100 is the
default setting and is recommended.
Set the transmit power of the antennas.
Transmit Power:
This value should remain at its default setting of 2347. If
RTS Threshold:
inconsistent data flow is a problem, only a minor modification
should be made.
The fragmentation threshold, which is specified in bytes,
Fragmentation:
determines whether packets will be fragmented. Packets
exceeding the 2346 byte setting will be fragmented before
transmission. 2346 is the default setting.
Set the interval for DTIM. A Delivery Traffic Indication Message
DTIM Interval:
(DTIM) is a countdown informing clients of the next window for
listening to broadcast and multicast messages. The default interval
is 1.
WMM (Wi-Fi Multimedia) is a QoS (Quality of Service) system for
WMM Capable:
your wireless network. Enable this option to improve the quality of
video and voice applications for your wireless clients.
Select the basic transfer rates based on the speed of wireless
TX Rates:
adapters on your wireless network. It is strongly recommended to
keep this setting to Best.
D-Link DWR-921 User Manual

Wi-Fi Advanced

32