Pptp - D-Link DWR-921 User Manual

Section 4 - Configuration
Choose Static IP only if your ISP assigns you an IP address.
Address Mode:
Otherwise, please choose Dynamic IP.
Enter the information provided by your ISP (Only applicable for
PPTP IP Address:
Static IP PPTP).
Enter the information provided by your ISP (Only applicable for
PPTP Subnet
Static IP PPTP).
Mask:
Enter the information provided by your ISP (Only applicable for
PPTP Gateway IP
Static IP PPTP).
Address:
IP address of PPTP server.
PPTP Server IP
Address:
User/account name that your ISP provides to you for PPTP dial-up.
Username:
Password that your ISP provides to you for PPTP dial-up.
Password:
Re-enter your password for verification.
Verify Password:
Choose Always-on when you want to establish PPTP connection
Reconnect
all the time. If you choose Connect-on-demand, the device will
Mode:
establish a PPTP connection when local users want to connect
to the Internet, and disconnect if there is no traffic after the time
period defined by the Maximum Idle Time setting.
The time of no activity to disconnect your PPTP session. Set it to
Maximum Idle
zero or choose Always-on to disable this feature.
Time:
D-Link DWR-921 User Manual

PPTP

13