Section 4 - Configuration
This page displays a list of currently-connected wireless clients, and their
respective MAC addresses.
This page lets you set up your wireless network and choose a wireless encryption mode. Click Apply to save your settings, or Refresh to revert to
your previous settings.
Check this box to enable wireless access. When you enable this
Enable Wireless:
option, the following parameters take effect.
Also known as the SSID (Service Set Identifier), this is the name of
Wireless
your Wireless Local Area Network (WLAN). Enter a name using up
Network Name:
to 32 alphanumeric characters. The SSID is case-sensitive.
Select the IEEE 802.11 standard used by your wireless clients.
802.11 Mode:
Enabling this feature will allow the router to automatically scan for
Enable Auto
the best wireless channel to use.
Channel Scan:
If Auto Channel Scan is disabled, select the desired channel here.
Wireless
Channel:
D-Link DWR-921 User Manual
Wi-Fi
Device List
Wi-Fi Settings
28