CONCORD Eye-Q Go 2000 Quick Start Manual page 7

SOFTWARE INSTALLATION
NOTE: Do not connect the camera to your computer before the camera drivers
and software installation is completed.
Installing the Camera Drivers and ArcSoft Applications:
1. Insert the CD-ROM included in your camera's packaging into your computer's CD-
ROM drive.
2. The installation screen will appear on the computer monitor. Click on "Software
Installation" to start the installation process.
3. Follow the software installation instructions on your screen to complete the ArcSoft
applications and camera drivers installation.
NOTE: If your computer has the CD-ROM automatic installation disabled,click on
START. Select MY COMPUTER and locate the CD-ROM Drive. Double click on the
CD-ROM Drive icon to show its contents. Double-click on the file named
SETUP.EXE and follow the instructions on your screen.
TRANSFERRING FILES TO THE COMPUTER
After installing the drivers and software, you may transfer files to your computer.
MAIN MENU
Setup
Exit
1. Select either PC (Windows Only) or DSC in the Setup Menu.
• Set the Mode switch to
• Press the MENU button. Use the
• Press to enter the Setup menu.
• In the Setup menu, press
• Press to select DSC or PC.
2. Connect your camera to the computer using the USB cable provided.
SETUP
Time-out 60S
Driver PC
TV PAL
PlayLogo O f f
.
button until Setup is highlighted.
until Driver is highlighted.
5
SETUP
Time-out 60S
Driver DSC
TV PAL
PlayLogo O f f