Taking Pictures In Continuous Shot Mode; Taking Pictures In Low Resolution Mode; Taking Video Clips - CONCORD Eye-Q 642 Quick Start Manual

TAKING PICTURES IN CONTINUOUS SHOT MODE

1. Turn on the camera.
2. Press the Mode button repeatedly until the Continuous Shot Mode icon (
3. Press the Shutter button to confirm selection of the mode. When Continuous Shot Mode is set, the icon
( ) will stop blinking.
4. Frame the subject in the viewfinder.
5. Press the Shutter button to take three consecutive pictures. Three beep sounds can be heard.
To exit Continuous Shot Mode:
1. Press the Mode button repeatedly until the Continuous Shot Mode icon (
Shutter button. The Continuous Shot Mode icon (
Or
2. Press and hold the Mode button for a few seconds to power the camera off first, and then press and hold
the Mode button to turn it back on.

TAKING PICTURES IN LOW RESOLUTION MODE

By default, the image resolution is 640 x 480 pixels. You may change the image resolution to low resolution,
that is 320 x 240 pixels, to reduce the size of the image to enable the camera to store more pictures.
1. Turn on the camera.
2. Press the Mode button repeatedly until the LQ indicator (
3. Press the Shutter button to confirm selection of the mode. The LQ indicator will stop blinking.
4. Frame the subject in the viewfinder.
5. Press the Shutter button to take a low-resolution picture.
To exit the Low Resolution mode, please
Press the Mode button repeatedly until the Low Resolution icon (
button. The Low Resolution icon (

TAKING VIDEO CLIPS

The camera can take video clips in AVI format at about 9 frames per seconds in QVGA (320 x 240)
resolution.
1. Press and hold the Mode button for about 3 seconds to turn the camera on.
2. Press the Mode button repeatedly until the video icon (
3. Press the Shutter button to confirm selection of the mode. The video icon (
4. Press and hold the Shutter button to record video clip. A long beep sound can be heard.
5. Release the Shutter button to stop recording. Otherwise, some time later the LCD will display "FUL"
which indicates the memory is full and recording is finished.
• When a video clip is taken, the frame counter will advance one frame.
• The Video Clip mode will be deactivated once a video clip is taken. To take one more video clip, repeat
steps 2-5 mentioned above.
) will disappear.
) will disappear.
3
TAKING PICTURES / TAKING VIDEO CLIPS
) is blinking.
) is blinking, then press the
) is blinking.
) is blinking, then press the Shutter
) is blinking.
) will stop blinking.