Warranty; Technical Data; Cleaning And Maintenance - Kampa Diddy Operating Manual

No. in
fig. 1, page 3
1
2
3
4
Connecting
1. Place the heater on a flat, stable and horizontal
surface.
2. Arrange the cord in accordance with the safety
instructions, away from traffic areas and where
it will not be tripped over.
3. Insert the plug into the socket.
Setting the temperature
➤Turn the control knob to the desired position.
Disconnecting and storing
!
CAUTION!
Ensure that the heater cools down
completely before storing.
1. Turn the control knob to „Off".
2. Unplug the heater from the socket.

Cleaning and maintenance

!
WARNING!
Unplug the heater from the socket before
cleaning and maintenance.
A
NOTICE!
• Do not use sharp or hard objects or any
cleaning or chemical products.
• Ensure that no water/moisture enters
the openings of the heater.
1. Clean the outer surface of the heater using a
lightly damp cloth.
2. Dry the heater thoroughly with a dry cloth.
6
Description
0 Off
I Minimum heat (750 W)
II Maximum heat (1500 W)
- tip switch

Warranty

The statutory warranty period applies. If the
product is defective, please contact the
manufacturer's branch in your country (see
kampaoutdoors.com/store-locator) or your
retailer.
For repair and warranty processing, please include
the following documents when you send in the
device:
• A copy of the receipt with purchase date
• A reason for the claim or description of the fault
Disposal
➤Place the packaging material in the appropriate
recycling waste bins, wherever possible.
M
If you wish to finally dispose of the product,
ask your local recycling center or specialist
dealer for details about how to do this in
accordance with the applicable disposal
regulations.

Technical data

Connection voltage:
Power level (Mode I):
Power level (Mode II):
Dimensions H x W x D:
Weight:
Certification:
4445103324
Diddy
220 – 240 Vw50/60 Hz
750 W
1500 W
26.5 x 18 x 18 cm
1 kg