3. Install a new bulb and parts in the reverse
order of removal.
Install the socket by aligning its "
u
mark with the round projection on the
front turn signal light housing. Then turn
it clockwise until the "
with the triangular projection.
Use only the amber bulb.
u
#
"
" mark is aligned
1. Remove the screw.
2. Remove the turn signal lens.
3. Turn the socket counterclockwise, then pull
4. Pull out the bulb without turning.
Electrical Trouble
u
Rear Turn Signal Bulb
Socket
Screw
it out.
Burned-out Light Bulb
"
" marks
Bulb
Turn signal lens
continued
89