Honda Supra GTR150 2020 Owner's Manual page 86

Tyre Puncture Removing Wheels
u
Installation
1. Attach the side collars to the front wheel.
2. Position the front wheel between the fork
legs and insert the front axle shaft from
the right side, through the right fork leg
and wheel hub.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the pads
to avoid scratching them.
3. Tighten the front axle nut.
Torque: 59 N·m (6.0 kgf·m, 44 lbf·ft).
82
4. After installing the wheel, apply the brake
lever several times, then check if the wheel
rotates freely. Recheck the wheel if the
brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.