Honda Supra GTR150 2020 Owner's Manual page 62

Engine Oil Changing Engine Oil
u
Changing Engine Oil
Changing the oil requires special tools. We
recommend that you have your vehicle
serviced by your dealer.
1. If the engine is cold, idle the engine for 3 to
5 minutes.
2. Turn the ignition switch to the OFF position
and wait for 2 to 3 minutes.
3. Place your vehicle on its centre stand on a
firm, level surface.
4. Place a drain pan under the drain bolt.
58
Drain bolt
5. Remove the oil fill cap/dipstick, drain bolt,
and sealing washer to drain the oil.
Discard the oil at an approved recycling
u
centre.
6. Install a new sealing washer onto the drain
bolt. Tighten the drain bolt.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft).
Sealing washer