Honda Supra GTR150 2020 Owner's Manual page 45

#
Cleaning and Lubricating
After inspecting the slack, clean the chain and
sprockets while rotating the rear wheel. Use a dry
cloth with high flash-point solvent. Use a soft
brush if the chain is dirty.
After cleaning, wipe dry and lubricate with the
recommended lubricant.
Recommended lubricant:
Drive chain lubricant
If not available, use SAE 80 or 90 gear oil.
Maintenance Fundamentals
Never use petrol or low flash point solvents for
cleaning the drive chain.
A fire or explosion could result.
Avoid getting lubricant on the brakes or tyres.
Avoid applying excess chain lubricant to prevent
spray onto your clothes and the vehicle.
Recommended Coolant
Use only genuine Honda PRE-MIX COOLANT
without diluting with water. Genuine Honda PRE-
MIX COOLANT is excellent at preventing
corrosion and overheating.
The coolant should be inspected and replaced
properly by following the maintenance schedule.
P. 33
2
NOTICE
Using coolant not specified for aluminium engines or tap/
mineral water can cause corrosion.
41