Alfa Romeo Giulia Owner's Handbook Manual page 50

55
Trip A and B
For all driving modes ("Dynamic",
"Normal" and "Advanced Efficiency"),
with the ignition device ON, the "Trip
computer" can be used to display the
values related to the car's operating
state.
This function is characterised by two
separate records, called "Trip A" and
"Trip B" (the latter can be deactivated
by Connect system), where the car's
"complete missions" (journeys) are
recorded in a reciprocally independent
manner.
"Trip A" and "Trip B" are used to display
the values relating to:
Distance travelled
Average fuel consumption
Average speed
Active trip
Fuel level gauge
48
To reset the values, press and hold down
the button on the right stalk.
Performance
The displayed parameters vary
depending on the active mode. The
modes can be selected through the "Alfa
DNA™" system and are as follows:
Normal
The screen graphically reproduces
05036S0177EM some parameters closely linked to the
efficiency of the driving style, with a view
to limiting consumption.
Advanced Efficiency
The three central icons on the screen
indicate the effectiveness of the driving
style, linked to the following parameters:
acceleration
deceleration
gearshift
with a view to limiting fuel consumption.
The graphic bar below the icons shows
current consumption and the green line
represents the optimal area. The globe
lights up gradually according to lower
consumption.
Dynamic
The displayed parameters are related
to car stability, the graphs illustrate
the trend of the longitudinal/lateral
accelerations (G-meter information),
considering gravity acceleration as a
reference unit.
Lateral acceleration peaks are also
indicated.
Race (where provided)
The displayed parameters are related
to car stability, the graphs illustrate
the trend of the longitudinal/lateral
accelerations (G-meter information),
considering gravity acceleration as a
reference unit.
Lateral and longitudinal acceleration
peaks are also indicated.
Alternative Performance
The displayed parameters vary
depending on the active mode. The
modes can be selected through the "Alfa
DNA™" system and are as follows:
Normal and Advanced Efficiency
The display fig. 56 graphically shows the
values of:
instantaneous consumption;
average fuel consumption (based on
"Trip A");
Below a certain speed value, when the
accelerator pedal is not pressed or in the
event of failure, dashes are displayed in
place of the consumption value ("– –. –").