Alfa Romeo Giulia Owner's Handbook Manual page 29

following functions in sequence on the
main menu: "Settings", "Lights" and
"Follow me"; the side lights and the
dipped beam headlights stay on for a
time that can be set between 30, 60 and
90 seconds.
Function activation
With the headlights on, take the ignition
device to the STOP position: the timer
starts when the light switch is rotated to
position O.
WARNING To activate this function the
headlights must be deactivated within
2 minutes after the ignition device has
been taken to STOP.
Function deactivation
This function is deactivated by switching
on the headlights, the side lights or
bringing the ignition device to ON.
AFS FUNCTION (Adaptive Frontlight
System)
(where provided)
This is a system combined with Xenon
headlights (Bi-Xenon Headlamps 35 W
version) which directs the main light
beam, horizontally and vertically,
and continuously and automatically
adapts it to the driving conditions round
bends/when cornering.
The system directs the light beam to
light up the road in the best way, taking
into account the speed of the car, the
bend/corner angle and the speed of
steering.
MAIN BEAM HEADLIGHTS
To activate the fixed main beam
headlights push the left lever towards
the instrument panel fig. 32. The light
switch must be turned to AUTO or
With main beam headlights on, the
warning light/icon on the instrument
panel will come on at the same time.
32
The main beam headlights are switched
off by pushing the left stalk forward
again. The warning light/icon
on in the instrument panel.
Flashing the headlights
The flashing of the main beam headlights
is activated by pulling the left stalk
towards the steering wheel, the lights
remain on while you are operating the
lever.
Automatic high beam (AHB system)
headlights
(where provided)
The AHB system is used to switch
the high beam headlights on and off
automatically and to adapt the lighting
near towns.
.
Function enabling
This function is enabled using the "Driver
Assistance" Menu and then selecting
"Comfort" in the Connect system with
the light switch turned to AUTO.
Function activation
The first time the main beam headlights
are activated (pushing the left lever)
the function is activated (green warning
light or the symbol
display).
If the main beam headlights are actually
on, the warning light/icon
04126S0020EM
come on in the instrument panel.
The function activates the high beam
headlights when the speed is higher than
switches
25 mph (40 km/h).
When the speed is lower than 15 mph
(25 km/h) and the function is active,
the function switches the main beam
headlights off.
If the fixed main beam headlights are
operated quickly again (pushing the left
stalk towards the instrument panel), the
warning light/icon
comes on the
will also
will switch on in
27