Installing The Expansion Blade Cover - IBM BladeCenter GPU Expansion Blade Installation Manual

Installing the expansion blade cover

The following instructions and illustration show how to install the expansion blade
cover.
To install the expansion blade cover, complete the following steps:
1. Read the Safety information beginning on page "Safety" on page v and
2. Orient the cover over the expansion blade.
3. Lower the cover so that the slots at the rear slide down onto the pins at the
4. Pivot the cover closed and press it firmly into place until the cover-release
CAUTION:
Hazardous energy is present when the blade server is connected to the power
source. Always replace the blade cover before installing the blade server.
Cover
Cover
release
"Installation guidelines" on page 7.
rear of the expansion blade.
latches click.
Statement 21:
Cover
release
Chapter 3. Installing options
15