Table of Contents
Advertisement
Maintenance and Storage
1.Disengage drives on level ground, stop drive to the tine section, set parking brake, stop
engine. Wait for all movement to stop before adjusting, cleaning or repairing.
2.Never allow untrained personnel to service machine.
3.Appropriately manage and correctly use the tools necessary for servicing or adjusting the
machine.
4.Carefully release pressure from components with stored energy.
5.Use care when checking the tines.
[1]Wrap the tines or wear gloves, and use caution when servicing them.
[2]Only replace tines.
6.On multi-bladed machines, take care as rotating one blade can cause other blades to
rotate.
7.Keep hands and feet away from moving parts. If possible, do not make adjustments with
the engine running.
8.Keep all parts in good working condition and all hardware tightened. Replace all worn or
damaged decals.
9.Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
Towing
1.Follow the manufacturer's recommendation for weight limits for towed equipment and
towing on slopes.
Disposal
Recycle and Waste Disposal
About Recycle
Recycling battery etc. is recommended for environmental conservation and economical use
of resources.
It may be required by local laws.
About The Waste Disposal
Make sure that waste generated when servicing or repairing the machine is disposed of in
accordance with local regulations.
(e.g. waste oil, antifreeze, rubber products, and wires etc.)
− 6 −
Advertisement
Table of Contents
