Change Lever; Up-Down Handle - Baroness TDA1200 Owner's Operating Manual

10-2. Change Lever

Stop the PTO rotation before shifting the change lever.
When the change lever for switching cannot be engaged easily, step on the clutch pedal
of the tractor once again, then the change lever will be engaged easily. If you operate the
change lever forcibly, the transmission and change lever can be damaged.
Operate the change lever for switching over crank rotation speed to change high and low
speed.
Shift the lever to the appropriate position.
Change lever
Low speed
High speed
− 25 −

10-3. Up-Down Handle

Operate the up-down handle to adjust the tine depth.
Rotate the handle to the appropriate direction.
Rotate the handle clockwise to increase the coring depth.
Rotate the handle counterclockwise to decrease the coring depth.
Scale mark 150A
Depth gauge
Up-down handle
Shallow Deep
Roller holding fixture