Specifications; Important Safety Instructions - Makita DC40RB Instruction Manual

ENGLISH (Original instructions)
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Do not short battery.
Do not expose battery to water or rain.
Do not destroy battery by fire.
Always recycle battery.

SPECIFICATIONS

Model:
Input
Output
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight according to EPTA-Procedure 01/2014, are shown in the table.
SAFETY WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:
SAVE THESE INSTRUCTIONS
1.
– This manual contains important safety and operating instructions for battery
charger.
Before using battery charger, read all instructions and cautionary markings on
2.
(1) battery charger, (2) battery, and (3) product using battery.
CAUTION – To reduce risk of injury, charge only Makita type rechargeable bat-
3.
teries. Other types of batteries may burst causing personal injury and damage.
Non-rechargeable batteries cannot be charged with this battery charger.
4.
Use a power source with the voltage specified on the nameplate of the charger.
5.
Do not charge the battery cartridge in presence of flammable liquids or gases.
6.
Do not expose charger to rain, snow, or wet condition.
7.
Ready to charge.
Delay charge (Battery cooling, too cold
battery, or waiting for charging).
Charging (0 - 80 %).
Charging (80 - 100 %).
Charging complete.
Charging (Cooling abnormality).
Defective battery.
A.C. 120 V 50–60 Hz / 50/60 Hz
2 ENGLISH
DC40RB
D.C. 40 V (max.)
2.0 kg (4.4 lbs)