Chevrolet CORVETTE Owner's Manual page 160

2. Touch the Phone icon on the Home Page
or the phone icon on the shortcut tray
near the bottom of the display.
3. Touch Phones at the top of the
infotainment display. There is also a
Connect Phones option in the middle of
the Phone display which will shortcut to
the Phone List menu.
4. Touch Add Phone.
5. Select the vehicle name shown on the
infotainment display from your mobile
phone's Bluetooth Settings list.
6. Follow the instructions on the mobile
phone to confirm the six-digit code
showing on the infotainment display and
touch Pair. The code on the mobile
phone and infotainment display will
need to be acknowledged for a successful
pairing.
7. Start the pairing process on the mobile
phone to be paired to the vehicle. See
the mobile phone manufacturer's user
guide for information on this process.
Once the mobile phone is paired, it will
show under Connected.
8. If the vehicle name does not appear on
your mobile phone, there are a few
ways to restart the pairing process:
Turn the cell phone's Bluetooth off
and then back on.
Go back to the beginning of the
Phone menus on the infotainment
display and restart the pairing
process.
Reset the mobile phone, but this step
should be done as a last effort.
9. If the mobile phone prompts to accept
connection or allow phone book
download, touch Always Accept and
Allow. The phone book may not be
available if not accepted.
10. Repeat Steps 1 8 to pair additional
mobile phones.
First to Connect Paired Phones
If multiple paired mobile phones are within
range of the system, the system connects to
the paired mobile phone that is set as First
to Connect. To enable a paired mobile phone
as the First to Connect phone:
1. Make sure the mobile phone is
turned on.
2. Touch Settings, then touch System.
Infotainment System
3. Touch Phones to access all paired and all
connected mobile phones and mobile
devices.
4. Touch the information icon to the right
of the mobile phone to open the mobile
phone's settings menu.
5. Touch the First to Connect option, to
enable the setting for that device.
Mobile phones and mobile devices can be
added, removed, connected, and
disconnected. A sub-menu will display
whenever a request is made to add or
manage mobile phones and mobile devices.
Secondary Phone
A mobile phone can be enabled as a
Secondary Phone by touching the
information icon to the right of the paired
mobile phone name to open the phone
settings menu. If a mobile phone is enabled
as a Secondary Phone, it can connect
simultaneously alongside another Bluetooth
mobile device. In doing so, the Secondary
Phone will be labelled as Incoming Calls.
This means the mobile device can only
receive calls. The Address Book of a
Secondary Phone will not be available and
hands-free outgoing calls cannot be placed
using this mobile phone.
159