Chevrolet CORVETTE Owner's Manual page 139

138 Infotainment System
Make sure to set up preferences before
setting a destination and starting active
guidance.
Map Preferences
Touch to choose between basic map feature
configurations:
Map Colours
Auto Touch to automatically change
modes based on lighting conditions.
Day (Light)
Night (Dark)
3D Landmark (Default is On) : Touch On or
Off. When turned on, the system will
display all 3D Landmarks on the map
depending on the zoom level.
3D Building (Default is Off) : Touch On or
Off. When turned on, the system will
display all of the possible 3D building shapes
on the map depending on the zoom level.
Show Terrain in 3D (Default is Off) :
If equipped, touch On or Off. When turned
on, the system will display terrain
information on the map in 3D view.
Auto-Zoom (Default is On) : Touch On or
Off. When turned on, the system will
automatically adjust the zoom level when
the vehicle is approaching a turn. After the
turn is completed, the system automatically
brings the zoom back to the originally set
level. If the vehicle is approaching a turn
with the next turn occurring shortly after,
the Auto-Zoom will remain on until both
turns are completed.
Route Preferences
Touch to access the Route Preferences. The
choices are:
Preferred Route Choose from two
different route options: Fastest or
Eco-Friendly.
Fastest would be the route with the
shortest drive time.
Eco-Friendly would be the most
fuel-efficient route.
Avoid on Current Route Choose any of
the road features to avoid while on route:
Motorways
Unpaved Roads
Ferries
Carpool Lanes
Toll Roads
Tunnels
Country Borders
Navigation Voice Control
Touch to access the voice control setting
display.
Navigation Volume To adjust the
volume level, touch the up and down
arrows. If the voice guidance prompt is
playing, volume can also be adjusted
using the knob on the centre console or
the volume switch on the steering wheel.
Navigation Voice Prompt Level during a
Call. Options available are:
Full Prompt (Selected by default)
Tone Only
None
Traffic Events (If Equipped)
This feature provides a list of events that
are on the route or nearby. Touch
then select Traffic Events. An OnStar
connected Navigation service plan is
required.
Traffic Preferences (If Equipped)
A
While in Map View, touch
and then Map and Navigation Settings to
access Traffic Preferences. When Show
Traffic on Map is turned on, the feature
A
and
, then Settings