Universal Remote System Operation - Chevrolet CORVETTE Owner's Manual

Universal Remote System
Operation
Using the Universal Remote System
Press and hold the appropriate Universal
Remote system button for at least one-half
second. The indicator light will come on
while the signal is being transmitted.
Erasing Universal Remote System
Buttons
Erase all programmed buttons when vehicle
ownership is terminated.
To erase:
1. Press and hold the two outside buttons
until the indicator light begins to flash.
This should take about 10 seconds.
2. Release both buttons.
Reprogramming a Single Universal
Remote System Button
To reprogram any of the system buttons:
1. Press and hold any one of the buttons.
Do not release the button.
2. The indicator light will begin to flash
after 20 seconds. Without releasing the
button, proceed with Step 1 under
Programming the Universal Remote
System.
Instruments and Controls 117