Memory Locations - Cobra microTALK LI7200-2WXVP Owner's Manual

10293_LI7200WX_vB.qxd 9/5/07
Main Icons
Mode Functions
Operation
Intro Operation Customer Warranty
Voice Activated Transmit (VOX)
Assistance
In VOX mode, your microTALK ® radio can be used "hands-free,"
automatically transmitting when you speak. You can set the VOX
sensitivity level to fit the volume of your voice and avoid
transmissions triggered by background noise.
To turn VOX mode on or off:
Mode Button
Secondary Icons
1. Press the Mode button until the VOX icon
flashes on the display. The current on or
off setting is displayed.
2. Press the Channel Up or Channel Down
Main Icons
button to turn VOX on or off.
VOX Icon
3. Choose one of the following:
Notice
a. Press the Mode button to enter the
selected on or off setting and proceed
to other functions.
Channel Buttons
Intro Operation b. Press the Lock/Enter button to enter Customer Warranty
Assistance
the selected on or off setting and return
to Standby mode.
To set VOX sensitivity:
Mode Button
1. Press the Mode button until the VOX icon
Secondary Icons flashes and the current sensitivity level
is displayed.
The current sensitivity level is displayed
with letters "LE" and a Number 01
VOX Sensitivity Level
through 05, with Number 05 being the
Notice
most sensitive level and Number 01
being the least sensitive level.
2. Press the Channel Up or Channel Down
Channel Buttons
button to change the setting.
3. Choose one of the following:
a. Press the Mode button to enter
the selected setting and proceed to
other functions.
b. Press the Lock/Enter button to
enter the selected setting and return
to Standby mode.
12
10:55 AM Page 12
Main Icons
Introduction
Main Icons

10 Memory Locations

•
Your microTALK
your most frequently used channels and channel/privacy code
combinations. These Memory Locations can be selected individually
or can be scanned. (See page 21 for memory location scan.)
Intro
Mode Button
Secondary Icons
Secondary Icons
Memory Icon
Channel Buttons
Lock/Enter Button
Operation Customer Assistance Warranty
Intro Operation Customer Warranty
Assistance
® radio has 10 Memory Locations for storing
Operation To program a memory location: Customer Warranty
Assistance
1. Press the Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down
button to select the memory location
(0 through 9).
Notice
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
Notice
3. Press the Lock/Enter button to enter
a new memory location or edit an already
programmed memory location. The channel
numbers will flash on the display.
4. Press the Channel Up or Channel Down
button to select a channel (1 through 22).
5. Press the Lock/Enter button.
The CTCSS icon and privacy code
numbers will flash on the display.
13
•