History; Ce Label - Siemens SITRANS DA400 Operating Instructions Manual

Introduction

1.3 History

Product information on SITRANS DA in the Internet (http://www.siemens.com/sitransda)
Instructions and Manuals (http://www.siemens.com/processinstrumentation/documentation)
1.3 History
This history establishes the correlation between the current documentation and the valid
firmware of the device.
The documentation of this edition is applicable for the following firmware:
Edition
01
09/2007
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
01
09/2007
1.4

CE label

This device meets the requirement of EU guidelines:
● 89/336/EEC Guideline of the Council on Aligning Legal Regulations of Member States on
● 94/9/EC Guideline of the European Parliament and the Council on Aligning Legal
This is communicated by the CE label.
D-76181 Karlsruhe
8
Comment
First edition
Electromagnetic Compatibility (EMV). Revised by
– 91/263/EEC
– 92/31/EEC
– 93/68/EEC
Regulations of the Member States on Devices and Protective Systems for defined use in
areas subject to explosion.
Firmware identification
FW: V3.01.**
SITRANS DA400 for material flow monitoring with protection against explosion
Operating Instructions, 09/2007, A5E00841152-01