Advertisement
It is important to operate under strict compliance with user manual.
1 、 Overall clean-up of the washing machine
1 Use dry and soft cloth to cleanse the machine.
2 Add neutral detergent into cleansing when the smudge is severe.
3 Please do not spray water directly to the washing machine.
4 After washing, disengage the water inlet hose.
5 Unplug the power supply cord and hang it up.
6 Please do not store water in the wash tub for long. Drain the water instantly
after each use.
7 Use clean and soft cloth to wipe out the surface and tub. Please open the wash
lid for a while (approximately one hour) and then close it.
Hang up the drain hose.
8
2 、 Clean-up of lint filter
Take out the lint filter. Put it in the clean water while it is still wettish. Then make
a rinse and reinstall it again.
Spin-drying
3 、
During the process of spin-drying, altogether with the program of "Drain" or
"Water injection and rinsing", it is suggested that about one minute of spin-drying
be conducted first and then you can carry out "Drain" or "Water injection and
rinsing" program. Otherwise, the spin-drying process is stopped due to over-
storage of water in spinning tub.
4 、 Icing precautions
After a thorough drain, switch water level selector to "Heavy" or "Normal".
1
If it is in "Drain" position, the icing can hardly melt down.
2
5 、 When it is frozen
Put hot water below 50
your hand to slightly turn around the impeller. It is suggested to use the washing
machine when it can drain.
℃
in the washing tub and soak for certain minutes, then use
5
Advertisement
