Haier QFD15 Series Owner's Manual & Installation Instructions page 15

CONNECTING AN ELECTRIC DRYER
TOOLS YOU WILL NEED
Slip-joint pliers
Flat-blade
screwdriver
MATERIALS YOU WILL NEED
4" dia. metal elbow
3/4" Strain relief
(UL recognized)
4" Duct clamps (2) or 4"
spring clamps (2)
Safety glasses
4" dia. metal duct
(recommended)
4" dia., UL-listed
flexible metal duct
(if needed)
4" Cover Plate
(Kit WE49X22606)
(if needed)
49-3000195
INSTALLATION INSTRUCTIONS
Phillips
screwdriver
Level
Gloves
Exhaust hood
Duct tape
Dryer power cord kit
(not provided with
dryer)
UL rated 120/240V,
30A with 3 or 4 prongs.
Identify the plug type as
per the house receptacle
before purchasing line
cord.
Stacking installations
may require a power
cord up to 6 feet in
length.
Before making the electrical connection, turn off the
circuit breaker(s) or remove the dryer's circuit fuse(s) at
the electrical box. Be sure the dryer cord is unplugged
from the wall. NEVER LEAVE THE ACCESS COVER OFF
THE TERMINAL BLOCK.
WARNING
- Electrical Shock Hazard
Disconnect power supply before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
15