Removal Of Outdoor Fan / Fan Motor - Daikin RW25JV1 Service Manual

Removal of Outdoor Fan / Fan Motor

3. Removal of Outdoor Fan / Fan Motor
Procedure
Step
Remove the washer-
1
fitted nut and remove
the outdoor fan.
2 Remove the 2 screws
and remove the fan
motor fixing frame.
Remove the 2 screws
3
and remove the fan
motor.
Cut the 3 clamps and
4
release the fan motor
lead wire.
Cut the clamp and
5
disconnect the
connectors for the fan
motor lead wire.
6
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Outdoor fan
Fan motor
Fan motor lead wire
Fan motor lead wire (Red)
Fan motor lead wire
(White)
Fan motor fixing frame
(R12557)
Clamp
Fan motor lead wire
(Black)
(R12552)
Si01-780
Points
Nut size: M6
10 mm
(R12236)
When reassembling, align
the mark of the outdoor
fan with the D-cut section of
the motor shaft.
(R12558)
Removal Procedure