Ethernet Menu - ADTRAN MX410 System Manual

Menu Descriptions

Ethernet Menu

The Ethernet Menu (see
Active Alarms: CRITICAL
Eth 1
Selection :
The Ethernet menu options are shown in
Option Description
1 IP Address
N/A Subnet Mask
2 Gateway
5-30 PRELIMINARY
Figure 5-19) is used to provision Ethernet information.
MX410
Ethernet
1 - IP Address
Subnet Mask
2 - Gateway
MAC Address
3 - Link Speed & Duplex
Functional Link Speed & Duplex : Unknown
Link Status
(T)oggle Between Interfaces
Figure 5-19. Ethernet Menu
Table
Table 5-15. Ethernet Menu Options
Function
This option invokes another menu which is used to enter the IP
Address and the Subnet Mask for the MX410/MX412. The IP
Address is written in the format XXX.XXX.XXX.XXX, where each 3-
digit field has a value between 1 and 255.
This field displays the Subnet Mask. A subnet mask is used to
reduce the traffic on each subnetwork by confining traffic to only
the subnetwork for which it was intended. A subnet mask makes
the entire network more manageable. In effect, each subnet func-
tions as though it were an independent network, keeping local traf-
fic local and forwarding traffic to another subnet only if the address
of the data is external to the subnet. The Subnet Mask is written in
the format XXX.XXX.XXX.XXX, where each 3-digit field has a value
between 1 and 255.
This option invokes another menu which is used to enter the
address of the default gateway/router between the internal
network and the external network. The Gateway address is written
in the format XXX.XXX.XXX.XXX, where each 3-digit field has a
value between 1 and 255.
MM/DD/YY HH:MM
ID:
: 192.168.100.1
: 255.255.0.0
: 192.168.1.1
: XX:XX:XX:XX:XX:XX
: Auto
: Down
'?' - System Help Screen
5-15.
MX410/MX412 System Manual
MX410
61189500L1-1B