Extern Menu - Clavia Nord Stage User Manual

11. System functions: Extern menu
E
XTERN MENU
Press S + E
HIFT
to the Extern section - see
You use the P
AGE
button to scroll quickly. The V
(S ) briefly to exit the menu.
HIFT
Note that most items on the Extern menu have separate entries for Panel A and B! Whatever Panel
has current edit focus when accessing these menu pages, "A" or "B", is shown in the upper right cor-
ner of the Display.
Most settings from the Extern menu are saved with a Program. The only exceptions are the "Extern
MIDI A/B Channel" and "Send on Load", which are global.
The following items can be found on the Extern menu:
Function
Extern MIDI A/B
Channel
Extern MIDI A/B
Volume
Extern MIDI A/B
Prog Change
Extern MIDI A/B
Prog Bank
Extern MIDI A/B
CC Value
Extern MIDI A/B
CC Number
Extern MIDI A/B
Send Wheel
Extern MIDI A/B
Send A.Touch
Extern MIDI A/B
Send CtrlPed
Extern MIDIA/B
Vel Curve
Extern MIDI
Send on Load
Page 70
to access the Extern menu, where you can find settings and functions relating
XTERN
"The Extern section" on page
-/+ buttons to navigate between the various menu items on the menu. Hold a Page
D
ALUE IAL
Description
This sets the MIDI channel the Extern section should use (make
sure the external instrument is set to receive on the same chan-
nel).
The Extern section can send MIDI Volume messages (0-127),
allowing you to control the level of the external device.
The Extern section can send MIDI Program Change messages
(0-127), allowing you to change programs on the external device.
This allows you to change MIDI Program Bank on the external
device. Note that there are many different variations between
instruments in how Banks are numbered and accessed via MIDI.
Nord Stage always transmits Bank messages as MIDI CC#32.
This will transmit values for the selected MIDI CC number.
This decides which MIDI Controller number the Extern section
should send when MIDI CC is activated.
To avoid transmitting Modulation Wheel messages make sure
this option is set to "No".
To avoid transmitting After Touch messages make sure this
option is set to "No".
To avoid transmitting Expression Pedal messages make sure
this option is set to "No".
Use this setting to adjust the velocity response curves in the
Extern section.
To avoid transmitting Program Change, Volume or MIDI CC
messages when you load a Program in Nord Stage, make sure
"Send On Load" is set to "Off" on the Extern menu.
63.
is used to change settings. When you are done, press E
Nord Stage v3.1x
XIT
Range/Values
1-16 (14 is default
for Panel A 15 is
default for Panel B)
Off (Default), 0-127
Off (Default), 1-128
Off (Default), 1-128
Off (Default), 1-127
MIDI CC 0-119
(Default is 2)
Yes (Default), No
Yes (Default), No
Yes (Default), No
Norm (Default),
Soft, Hard
No (Default), Yes