Table of Contents
Advertisement
Nord Stage v3.1x
S
ETTING OUTPUT
Each instrument has a L
the corresponding instrument section. The L
A
G
DDING A
Nord Stage features four effect groups; the Rotor section (rotary speaker effect), the
Effects section (three separate effects units; Effect 1, 2 and Delay), the Ampsim/EQ
section (overdrive and amplifier/speaker modelling with EQ), and a Compressor and
Reverb section. The Compressor and Reverb effects are global, and affect all instru-
ments routed to the main CH OUT 1/2 jacks. The Rotor can process the same instru-
ment from both panels (Organ A&B, Piano A&B or Synth A&B). The other effects
can process one freely selectable instrument per Panel.
• To add a global reverb effect to a sound, simply press the O
section.
Now you can adjust the amount of reverb effect using the D
the basic reverb character (Hall/Hall soft/Stage/Stage soft/Room) using the Selector
button!
How to use the other effects is described in the Effects chapter, see
page
49..
L
EVEL FOR INSTRUMENTS
rotary encoder at the top of the panel. This adjusts the output level for
EVEL
LOBAL EFFECT
4. Getting Started: Setting output Level for instruments
encoders can be Morph controlled.
EVEL
button in the Reverb
N
/W
RY
ET
knob, and set
"The Effects" on
Page 15
Hide quick links:
Advertisement
Table of Contents
