Storing Programs - Clavia Nord Stage User Manual

5. The Program section: Storing Programs
S P
TORING
Storing a Program will overwrite the existing Program in the selected memory location.
Note! When Nord Stage is shipped from factory, Memory Protect is set to 'On'. To be able to
store Programs, you need to change this to "Off". See
S P
TORING A
You can store a Program in two ways, with the old name or with a new name. To store a Program
without changing its name, proceed as follows:
1. Press the S
TORE
rently selected P
the D
ISPLAY
Program number), plus the Program name,
2. Next step is to select a Page/Program location to store the edited Program in. You can use the
P -/+ buttons to select a Program Page (1-21), and the P
AGE
gram number on the selected Page (or the Live 1 or 2 memories). Alternatively, you can use the
V D
ALUE IAL
press E (S
XIT
• From here you can opt to name the program before finally storing it - see "Naming a Program"
below.
3. Press S
TORE
duration.
Page 20
ROGRAMS
ROGRAM
button once. The S
button indicator starts blinking, and
ROGRAM
will read "Store to X : X" (the current Page and
to scroll through all Programs (on all Program Pages). To cancel the operation,
).
HIFT
again to store your Program. The Display now reads "Program Stored!" for a short
"Memory Protect" on page
button and the cur-
TORE
Nord Stage v3.1x
Store to 1:5
Wizard
1-6 buttons to select a Pro-
ROGRAM
68.