Clavia Nord Stage User Manual page 23

Nord Stage v3.1x
N P
AMING A
To name a program, proceed as follows:
1. Hold down S
blinking, and the D
2. Now use one of the following methods to name your Program:
• You can move the cursor position left or right in the D
• When the cursor is at the position where you want to enter/change a character, you can use the
V D
ALUE IAL
• By holding down S
position.
• By holding down S
sor position.
• Alternatively, you can press and hold down the KB Z
characters in the D
the V D
ALUE IAL
Z button the cursor automatically moves to the next position.
ONES
3. Press S
TORE
above to store your name with the Program.
ROGRAM
and press the S
HIFT TORE
will read "Set Name".
ISPLAY
to scroll through all available characters (a-z.A-Z, 0-9, Space and "-").
and pressing the I
HIFT
and pressing the D
HIFT
with the focus on the character the cursor was last on. You can now use
ISPLAY
to select a character at the current cursor position. When you release the KB
again. Now you can use the same methods as outlined in "Storing a Program"
5. The Program section: Storing Programs
A ... button once. The S
S
by using the P
ISPLAY
(P +) button, you enter a blank step at the cursor
NS AGE
(P -) button, you erase the character at the cur-
EL AGE
2
ONES OR
button indicator starts
TORE
-/+ buttons.
AGE
3 button. This will bring up the
Page 21