Table of Contents
Advertisement
The following table provides more information about the USB specifications:
Table 23. USB specifications
Front panel
● One USB 2.0-compliant port
● One iDRAC Direct (Micro-AB
USB) port
eSATA port
The eSATA port is not supported on VxRail D Series appliances.
LOM/NIC ports
The VxRail D Series system supports 10 Gb or 25 Gb Ethernet through the LAN-on-Motherboard (LOM) mezzanine (Mezz)
OCP network card for VxRail management. Access is through the LOM Mezz port on the back panel.
Serial connector
The serial connector connects a serial device to the system. The VxRail D Series system supports one serial connector on the
back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The VxRail D Series system supports
two 15-pin VGA ports on the front and back panels.
Video specifications
The VxRail D Series system supports Matrox G200eR2 graphics card with 16 MB capacity.
Table 24. Supported video resolution options
Resolution
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 1024
1440 x 900
Environmental specifications
Table 25. Temperature specifications
Temperature
Storage
Continuous operation
22
Technical specifications
Back panel
● Two USB 3.0-compliant port
Refresh rate (Hz)
60, 70
60, 75, 85
60, 75, 85
60, 75, 85
60, 75
60
Specifications
–40°C–70°C (–40°F–158°F) per Mil-Std 810G Method 501.5, Proc 1
5°C–45°C (41°F–104°F), with no direct sunlight on the equipment
Internal USB
● One internal USB 2.0 port on the FIO board
Color depth (bits)
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
Advertisement
Table of Contents
