Standard Operating Temperature - Dell D560 Owner's Manual

Table 25. Temperature specifications (continued)
Temperature
(for altitude less than 950 m or 3117 ft)
Fresh air
Excursion temperature
Maximum temperature gradient (operating and
storage)
Table 26. Relative humidity specifications
Relative humidity
Storage
Operating
Table 27. Maximum vibration specifications
Maximum vibration
Operating
Storage
Table 28. Maximum shock specifications
Maximum shock
Operating
Storage
Table 29. Maximum altitude specifications
Maximum altitude
Operating
Storage

Standard operating temperature

Table 30. Standard operating temperature specifications
Standard operating temperature
Continuous operation
(for altitude less than 950 m or 3117 ft)
Specifications
For information about fresh air, see Expanded Operating Temperature
section.
55°C per Mil-Std 810G
NOTE: Configuration restrictions will apply. For more information,
contact your Dell EMC sales support representative.
20°C/h (68°F/h)
Specifications
5% to 95% RH with 33°C (91°F) maximum dew point Atmosphere
must be noncondensing at all times.
5% to 85% relative humidity with 29°C (842°F) maximum dew point
Specifications
Random vibration per Mil-Std 810G method 514.6, 0.00220783
at 10 Hz to 500 Hz (overall 1.04
Mil-Std 810G Procedure I, Cat 4, Fig 514.6C-1 (US highway truck
vibration), 1 hour per axes
Specifications
Mil-Std 810G method 516.6, Proc I, 40G, 11 ms, 3 shocks in +/-
directions in 3 axes (total 18 shocks)
Mil-Std 810G method 516.6, Proc I, 40G, 11 ms, 3 shocks in +/-
directions in 3 axes (total 18 shocks)
Specifications
Mil-Std 810G method 500.5, Proc. II, air carriage, 15,000 ft for 1 hour
after stabilization
Mil-Std 810G method 500.5, Proc. I, 40,000 ft for 1 hour after
stabilization
Specifications
+5°C–45°C (41°F–113°F) with no direct sunlight on the equipment
NOTE: The 150W CPU support is only up to 35°C.
), all 3 axes, 1 hour per axis
rms
Technical specifications
2
g
/Hz
23