Multi-Function Dial - Icom IC-7300 Information

■ Multi-function dial

The function of the Multi-function dial (
When the Multi-function menu is closed,
be enabled to adjust functions by pushing or touching
the item for 1 second on the Multi-function menus.
The function is displayed in the upper right corner of
the screen.
Function indicator for MULTI
) is enhanced.
MULTI
* On the Multi-function menus, touch the item for 1
can
MULTI
second to assign the function to
To cancel the function assigned to
Function indicator for Multi-function control, or hold
down
Indicator
RIT
∂TX
RIT ∂TX
kHz
M-CH
RF PWR* Adjusts the transmit output power.
MIC G*
COMP*
MONI*
SPEED*
PITCH*
NB LEV*
NB DEP*
NB WID*
NR LEV*
NOTCH*
VOX G*
A-VOX*
VOX D*
BKIN D*
3
for 1 second.
MULTI
Action
Rotate Adjusts the RIT frequency.
Hold Clears the RIT frequency.
down
Rotate Adjusts the ∂TX frequency.
Hold Clears the ∂TX frequency.
down
Rotate Adjusts the RIT ∂TX frequency.
Hold Clears the RIT ∂TX frequency.
down
Changes the operating frequency in kHz
steps. (VFO mode only)
L Rapidly rotating
MULTI
increases the tuning speed.
In the Memory mode, selects Memory
channels.
Adjusts the microphone gain.
Adjusts the Speech Compressor level.
Adjusts the audio level for the Monitor
function.
Adjusts the Keying speed.
Adjusts the CW pitch.
Adjusts the Noise Blanker level.
Adjusts the DEPTH (Noise attenuation
level).
Adjusts the WIDTH (Blanking duration
time).
Adjusts the Noise Reduction level.
Adjusts the Notch filter frequency.
Adjusts the VOX gain.
Adjusts the ANTI VOX level.
Adjusts the VOX delay time.
Adjusts the Break-in delay time.
.
MULTI
, touch the
MULTI
automatically