4.9 Operation Panel and Error Indication
POWER lamp (Green)
Lights when the power is turned on. It blinks when a memory check error has
occurred.
ERROR lamp (Red)
Lights or blinks to show different error states. It also blinks while the printer is
waiting for a macro to be executed. (See "10.1 Command List", and "Executing
the macro".)
Error indication
Memory check error
Cover open
Head overheat
Paper near-end
Paper end
Cutter motor lock
Macro execution wait
Low voltage error
High voltage error
Waiting for label
cutter action
Label detection error
Waiting for label
peeling action
POWER LED
(Quick blinking)
Lights
Lights
Lights
Lights
Lights
Lights
Lights
Lights
OFF
OFF
OFF
— 19 —
ERROR LED
Lights
Lights
(Slow blinking)
Lights
Lights
(Quick & Slow blinking)
(Blinking)
Lights
(Quick & Slow blinking)
(Blinking)
Set the specified label roll.
(Slow blinking)
Discharge labels from Exfoliation
(Blinking)
Mechanism.
Recovery method
Not recoverable.
Close the cover.
Recovers automatically when the
temperature returns to normal.
Set a new paper roll.
Set a new paper roll.
Remove paper jams.
Press the FEED switch.
Not recoverable.
Not recoverable.
Press the FEED switch.