Esc C 3 N - Citizen CBM-1000 User Manual

ESC c 3 n

[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
Selecting the Paper Sensor valid for a paper end signal output
<1B>H<63>H<33>H<n>
0 n 255
This command selects by which Paper Sensor a paper end signal
should be output. Each bit for "n" has the following meaning:
Bit
0 Paper Near-end
1 Paper Near-end
2
3
4
5
6
7
This command is valid only for the parallel interface.
The bit0 and 1 are ignored when using the label paper.
n = 15
n = 12 (When using the label paper)
— 87 —
Position
Paper end
Paper end
Undefined
Undefined
Undefined
Undefined
Value
0 1
Disabled Enabled
Disabled Enabled
Disabled Enabled
Disabled Enabled