Advertisement
Quick Links
Visit website for
available languages of
this document.
DESCRIPTION
TECHNICAL SPECIFICATIONS
Technology:
Radiated frequency:
Radiated power density:
Supply voltage:
to be operated from SELV-compatible
power supplies only
Supply frequency:
Power consumption:
Output
relay contact rating (max. voltage):
relay contact rating (max. current):
Max. switching power:
Detection range*:
Detection mode:
Output hold time:
Temperature range:
Weight:
Material:
IP rating:
Certification:
* Detection range is dependent upon object size, object orientation, object speed, and environmental conditions.
75.5746.05 MS09 20210115
MAGIC SWITCH: MS09
1
2
1. Faceplace
2. Microwave motion sensor
3. Connector
4. Housing
microwave motion sensor
24.125 GHz
< 5 mW/cm
2
12 – 24 VAC ±10%
12 – 24 VDC +30% / -10%
50 – 60 Hz
< 1.5W
relay with switch-over contact (voltage-free)
60 VDC / 125 VAC
1A (resistive)
30W DC / 60 VAC
4 – 24" (adjustable)
motion (bidirectional)
0.5 – 30 sec
-4 – 131 °F (-20 – 55 °C)
0.34 lbs
ASA, PC
IP65
Electromagnetic compatibility (EMC) according to 2004/108/EC
FCC: G9B-210161
IC: 4680A-210161
Specifications are subject to change without prior notice.
All values measured in specific conditions.
IP65, touchless, activation sensor
4
3
Page 1 of 4
Advertisement
Related Manuals for BEA MAGIC SWITCH MS09
Summary of Contents for BEA MAGIC SWITCH MS09
- Page 1 MAGIC SWITCH: MS09 IP65, touchless, activation sensor Visit website for available languages of this document. DESCRIPTION 1. Faceplace 2. Microwave motion sensor 3. Connector 4. Housing TECHNICAL SPECIFICATIONS Technology: microwave motion sensor Radiated frequency: 24.125 GHz Radiated power density: < 5 mW/cm Supply voltage: 12 –...
- Page 2 PRECAUTIONS Only trained and qualified Always test the proper The warranty is invalid if personnel are recommended to operation of the installation unauthorized repairs are made install and set up the sensor. before leaving the premises. or attempted by unauthorized personnel.
- Page 3 The relay will hold indefinitely until a second detection occurs. WIRELESS FUNCTIONALITY For the 900 MHz wireless programming instructions, please reference BEA User’s Guide 75.5937 which comes with the 900 MHz wireless receiver (sold separately).
- Page 4 BEA, INC. INSTALLATION/SERVICE COMPLIANCE EXPECTATIONS BEA, Inc., the sensor manufacturer, cannot be held responsible for incorrect installations or incorrect adjustments of the sensor/device; therefore, BEA, Inc. does not guarantee any use of the sensor/device outside of its intended purpose.