Local Operation; Programming Via The Handheld Programmer; Parameter Menu Structure; The Lcd Display - Siemens Sitrans LR 460 Instruction Manual

Local Operation

Programming via the handheld programmer

Although the complete range of parameters is only accessible via PDM
and adjust many of the parameters via the Siemens Milltronics infrared handheld
programmer.
• For the complete list of parameters, see
page 58.
LCD menu structure
•
handheld programmer, preceded by the menu number.

Parameter Menu Structure

The parameters are organized into function groups, and arranged in a 4-level menu
structure. For example:
1. Identification
1.2. Configuration

The LCD Display

Details on the LCD display are given in
r
Note: The ARROW buttons shown below are required for programming
this product. The additional buttons on the hand programmer do not
apply to SITRANS LR 400.
SITRANS LR 400
buttons
1.
Please see page 46 for
7ML19985JM01
on page 37 gives a list of all parameters accessible via the
1.2.2. Remote Lock.
Start Up
C
Remote operation via PROFIBUS PA
SITRANS LR 460 – INSTRUCTION MANUAL
Appendix A: Parameter Descriptions
, page 24 onwards.
Key Programming Mode
Parameter scroll UP
Parameter scroll DOWN
LEFT Arrow (or CANCEL)
RIGHT Arrow (or ENTER)
1
, you can access
on
Page 33