Quick Start Via Local Operation; Activating Sitrans Lr260; The Lcd Display - Siemens SITRANS LR260 Operating Instructions Manual

Quick Start via local operation

SITRANS LR260 carries out its level measurement tasks according to settings made via
parameters. The settings can be modified locally via the Local User Interface (LUI) which
consists of an LCD display and a handheld programmer.
A Quick Start Wizard provides an easy step-by-step guide to help you configure the
device for a simple application. There are two ways to access the wizard:
Quick Start Wizard via the handheld programmer
• 7-step
• 4-step Quick Start Wizard via SIMATIC PDM
SIMATIC PDM.
For more complex setups, see
complete range of parameters, see

Activating SITRANS LR260

Note:
Keep infrared devices such as laptops, cell phones, and PDAs, away from
SITRANS LR260 to prevent inadvertent operation.
Power up the instrument. SITRANS LR260 automatically starts up in Measurement mode.
Press M M ode to toggle between Measurement and Program Mode.

The LCD Display

Measurement mode
Normal operation
1 2
LEVEL
18.91
21.40 °C
DATA EXCH.
8
6
Fault present
S: 0 LOE
1)
In response to a key press request. For details, see
page 24.
Page 22 SITRANS LR260 (HART) – INSTRUCTION MANUAL
Appendix E: Application Example
Parameter Reference
1)
1 – toggle indicator for linear units or %
3 4
2 – selected operation: level, space, or distance
[ ]
3 – measured value (level, space, or distance)
M
4 – units
5 – bar graph indicates level
6 – secondary region indicates on request
electronics temperature, echo confidence,
loop current, or distance
7 – text area displays status messages
8 – device status indicator
5
7
7 – text area displays a fault code and an error message
8 – service required icon appears
Key functions in Measurement mode
on page 28
on page 33 for programming via
on page 103, and for the
on page 45.
1
7ML1998JE01
on