Hazardous area installations
Product Nameplate
Instructions specific to hazardous area installations
(Reference European ATEX Directive 94/9/EC,Annex II, 1/0/6)
The following instructions apply to equipment covered by certificate number DMT 01
ATEX E 038:
1.
For use and assembly, refer to the main instructions.
2.
The equipment is certified for use as Category 1/2 D equipment. The Essential
Health and Safety Requirements are assured by compliance with EN 50281-1-1:1998;
Dust Explosion Protection.
3.
The equipment may be used with dust and fibers with apparatus temperature class
T. See table below.
Page 22
SITRANS LR 460 – INSTRUCTION MANUAL
7ML19985JM01