Gravely Rapid XZ Series Owner's Manual page 7

Reverse connections may result in sparks which can cause
serious injury. Always connect positive (+) lead of charger to
positive (+) terminal, and negative (-) lead to negative (-)
terminal.
ALWAYS disconnect negative (-) cable FIRST and positive
(+) cable SECOND. ALWAYS connect positive (+) cable
FIRST, and negative (-) cable SECOND.
Explosive Gases from battery can cause death or serious
injury. Poisonous battery fluid contains sulfuric acid and its
contact with skin, eyes or clothing can cause severe
chemical burns.
No flames, No sparks, No smoking near battery.
ALWAYS wear safety glasses and protective gear near
battery. Use insulated tools.
DO NOT TIP battery beyond a 45° angle in any direction.
ALWAYS keep batteries out of reach of children.
Battery posts, terminals and related accessories contain
lead and lead compounds, chemicals known to the State of
California to cause cancer and reproductive harm. Wash
hands after handling.
ALWAYS block wheels and know all jack stands are strong
and secure and will hold weight of unit during maintenance.
Release pressure slowly from components with stored
energy.
NEVER attempt to make any adjustments to unit while
engine is running (except where specifically recommended).
Stop engine, remove key or spark plug wire and wait for all
moving parts to stop before servicing or cleaning.
Check parking brake operation frequently. Adjust and
service as required.
ALWAYS maintain unit in safe operating condition. Damaged
or worn out muffler can cause fire or explosion.
Maintain or replace safety and instruction labels, as
necessary.
NEVER store unit with fuel in fuel tank, inside a building
where any ignition sources are present.
Shut off fuel and allow engine to cool completely before
storing in closed area or covering unit.
Clean grass and debris from unit, especially from around
muffler and engine, to help prevent fires.
For extended storage, shut off fuel and clean unit thoroughly.
See engine manual for additional storage requirements.
Lower cutting deck unless a positive mechanical lock is
used.
Use only attachments or accessories designed for your unit.
Check all hardware at regular intervals, especially blade
attachment bolts. Keep all hardware properly tightened.
Check attachment components frequently. If worn or
damaged, replace with manufacturer's recommended parts.
GB - 7