Table of Contents
Advertisement
CA-8 & CA-8F Easy Controller (Optional)
The CA-8 Easy Controller is used only in master/slave mode. Connect the controller to the 1/4"
microphone plug in the first unit. The table below describes the different preset shows the CA-8
Controller can command.
CA-8 BUTTONS
Stand By
Blackout
ST-200X User Manual
Mode Button
Function button
Audio
Press function and all units will
(LED off)
strobe quickly.
(Audio triggered)
Manual
Steps to the next preset pattern.
(LED on)
(Audio triggered)
Auto
Tap to select from 12 patterns
(LED blinks)
with preset speeds.
Hold for 3 seconds to select 1 of
3 brightness levels.
Note! You must reselect the desired pattern
after setting a brightness level. Pressing the
Function key in this mode will automatically
step to the next pattern regardless of how
long you hold the key.
12
Operating Instructions
Figure 3 - CA-8 Easy Controller &
the CA-8F Foot Controller
Revision: 2004-11-02/11:00
Advertisement
Table of Contents
