SATO Argox O4-250 User Manual page 36

3 Printer operation
Smart mode: Print from the first label immediately according to label length
setting. Make sure to carefully align label bottom edge at the tear-off
position before printing.
29. Reprint After Error
When it is enabled, your printer reprints the label after the error fixed if it is
printed incorrectly due to the error.
30. Backfeed Enabled/Disabled
Enable or disable backfeed during the printing process. When it is enabled,
the printer moves the paper forward in a predefined length 1 second after
printing, and pulls the paper back in a predefined length once the printing
begins again. When it is disabled, the printer won't move the paper at all.
31. Cutter Enabled/Disabled
Enable or disable the cutter during the printing process.
32. Peeler Enabled/Disabled
Enable or disable the dispenser during the printing process.
33. Cutter/Peeler Offset
Move the cutting line or the peeling position forward or backward. The
value in the angle brackets is the offset unit.
34. IP Address
The static IP address of the printer. The default value is "192.168.1.1".
35. Subnet Mask
The manually specified subnet mask of the printer. The default value is
"255.255.255.0."
36. Gateway
The manually specified gateway of the printer. The default value is "0.0.0.0."
37. MAC Address
The unique address assigned to the printer that connects to the internet.
38. DHCP
When DHCP is enabled, it assigns an IP address to the printer automatically.
39. DHCP Client ID
It is an arbitrary value sent to the DHCP server to reserve an IP address for
the printer.
40. DHCP Host Name
30